Network Access Fix ~5 min · multi-device

The EtherChannel won't come up

SW1 and SW2 should bundle Gi0/1–Gi0/2 as Port-channel 1. Both sides were configured LACP passive, so nobody initiates and Po1 stays down. Fix it on SW1 by switching to active.

Objective

○SW1 Gi0/1 & Gi0/2 in channel-group 1 mode active

Hints

Hint — the fix

enable
configure terminal
 interface range gi0/1 - 2
  channel-group 1 mode active
  end
show etherchannel summary